Net-optics 4 Station Bypass Switch w_Heartbeat Instrukcja Użytkownika Pobierz pdf (Strona 12)

4 Station Bypass Switch with Heartbeat

Compiled on 16-Jan-06 15:35:00

4. Type ? and press ENTER for a list of commands.

The following commands are listed:

a = Set Timeouts

b = Set Conguration

c = Set Heartbeat Packet

d = Show Conguration

e = Show Heartbeat Packet

f = Show Port Status

g = Set Switch Name

z = Reset to Factory Defaults

To set the timeout values:

1. Type a and press Enter to set the timeout values.

2. At the input time out period prompt, enter the number of

seconds between each heartbeat (1-254 seconds). Press Enter.

3. At the input retry count prompt, enter the number of missed

heartbeats allowed before the switch enters Bypass ON mode (1-254).

The input retry count must be greater than or equal to the input timeout.

Press Enter.

Note: ________________________________________________________________

Manufacturing default for Input Timeout Period and Input Retry Count are set

to 1 and 3 respectively.

______________________________________________________________________

To set the LFD and Bypass Detect options:

1. Type b and press Enter.

2. At the Bypass Detect on/o prompt, type 1 to turn on or 0 to turn

off Bypass Detect.

3. At the LFD on/o prompt, type 1 to turn on or 0 to turn off Link Fault

Detect.

To input a custom heartbeat packet:

1. Type c and press Enter. You are prompted for the length of the packet

including header bytes and CRC bytes.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Brak uwag

Net-optics 4 Station Bypass Switch w_Heartbeat Instrukcja Użytkownika Strona 12