Net-optics Link Aggregator Tap 10/100 In-Line to GigaBit with Instrukcja Użytkownika Pobierz pdf (Strona 10)

10/100 In-Line Link Aggregator Tap

NOTE: _____________________________________________________________

At 10Mbps, if any of the network links are unplugged during operation, it

will be necessary to restart trafc from the connected network devices upon

re-connecting to the Link Aggregator. This is to ensure that trafc is properly

copied to the monitor ports and only applies to networks running at 10Mbps.

____________________________________________________________________

Connecting Monitoring Devices

1. Supply power to the Tap using the power supply adapter included

with the unit. Verify that the power LED illuminates.

2. Remove the SFP from its protective packaging.

3. Remove the temporary plug from Monitor Port 1.

Figure 5: Connecting to Monitoring Devices using SFP modular connectors

4. Insert the SFP in the Monitor 1 Port until you hear it click into place.

5. Connect Monitoring Port 1 to the appropriate port on the monitoring

device. This will monitor all aggregated links connected to the network

ports.

6. If you are installing multiple SFPs, repeat Steps 1 through 4 for Monitor

Port 2.

www.netoptics.com

In-Line Link Aggregator

Monitor

Network

LINK

ACT

LINK

ACT

LINK

ACT

LINK

ACT

1 2 3 4

A BA B

LINK

ACT

To Monitor Device

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Net-optics Link Aggregator Tap 10/100 In-Line to GigaBit with Instrukcja Użytkownika Strona 10